More details of AMD's upcoming common socket for both its desktop APUs and high-end CPUs emerged from a recent article by Italian tech-site Bits-n-Chips. To begin with, AM4 will be an µOPGA (pin-grid array), in which the pins will continue to be located on the processor package, and contact points on the socket. The package will be square, and 40 mm in length, making it about as big as a current socket FM2+ package. It will have a pin-count of 1,331 pins, a big increase from the 942 pins of AM3+, and 906 pins of FM2+. AMD could continue to develop LGA sockets for its multi-socket capable Opteron processors based on the "Zen" architecture.
The AM4 platform layout will be functionally closer to that of the FM2+ than the AM3+. Besides the integrated memory controller, the northbridge will be entirely located on the processor die; and so the HyperTransport main system bus will be wired internally. Besides hundreds of electrical pins, the AM4 pin-map will consist of memory I/O, integrated graphics I/O, PCI-Express, and the chipset bus; besides other low-level system I/O interfaces. The memory controller on some of the first AM4 chips, such as "Summit Ridge," will natively support DDR4-2400 MHz, and DDR4-2933 MHz through overclocking.
from techPowerUp! http://ift.tt/22TtpeS
via Techpowerup is my favorite place to get more review and the computer hardware part review, the review and the news is just so good, i really recommend you to visit the original page to read the full story about what the news beast and what the site talking about, enjoy the computer hardware part information online, visa techpowerup, i hope someday i will easily buying the new list item on the review list, just to make very beast computer rig, to encode the x264, that will kicking some ass... be ready
Post a Comment
This blog needed you to understand the word spam - never spam on this blog, although i will not moderate all of it, but you will learn it yourself, educate yourself